What Are Double Glazed Windows and How Do They Work?

If you’ve ever stood near a single-glazed window on a cold winter morning, you already understand the problem. The glass feels cold to the touch, condensation pools along the bottom of the frame, and the warmth you’ve been paying to generate drifts straight outside. Double glazed windows were designed to fix that. But how they actually work — and why some perform dramatically better than others — is worth understanding before you spend money on them.

This article explains the basics clearly, gets into the detail that actually matters, and offers practical guidance for Australian homes specifically. Because advice written for the UK or North America doesn’t always translate well here, and choosing the wrong specification for your climate can mean spending a lot of money for mediocre results.

For homeowners comparing products, it also helps to understand that performance depends on the whole system rather than the glass alone. Whether you’re planning a full window replacement in Brisbane or looking more closely at opening styles such as double glazed casement windows, the frame, seals, glass specification, and installation quality all influence how much comfort and energy efficiency you actually gain.

What Double Glazed Windows Actually Are

A double glazed window, also called a double-paned window or an insulated glass unit (IGU), consists of two panes of glass separated by a sealed gap. That gap — typically between 6mm and 20mm wide — is filled with either dry air or an insulating gas, most commonly argon. The whole assembly is sealed around the edges with a spacer bar and an airtight seal.

The term “double glazing” refers to this sealed unit as a whole. When people talk about replacing their windows with double glazing, they mean replacing single-pane glass with this two-pane, sealed configuration.

It sounds straightforward, and the basic concept is. But the details within that description — the gas, the spacer, the glass type, the coatings — are what separate a genuinely high-performing window from one that barely improves on what came before.

How Double Glazed Windows Work

The science behind the gap

Heat moves in three ways: conduction (through solid materials), convection (through moving air or fluid), and radiation (through electromagnetic waves, like sunlight). A single pane of glass does almost nothing to slow any of these. It conducts heat readily, air moves freely on both sides of it, and radiant heat passes straight through.

The sealed gap in a double glazed window addresses conduction and convection directly. The gas in the cavity — whether air or argon — is a poor conductor of heat compared to glass or metal. And because the cavity is sealed, the gas can’t circulate freely enough to carry much heat by convection either.

Argon is the most commonly used fill gas because it’s denser than air and conducts heat even more poorly, which improves the unit’s insulating performance by a meaningful margin. Krypton is also used in higher-performance units, particularly where the cavity needs to be narrower, though it costs more.

What Low-E glass does

Low-emissivity (Low-E) glass adds another layer of performance that the gas fill alone can’t provide. A microscopically thin metallic coating is applied to one surface of the glass. This coating reflects radiant heat back into the room in winter rather than allowing it to escape through the glass. In summer, depending on where the coating is applied, it can also reduce the amount of solar heat entering the home.

This is a significant upgrade in most Australian climates, and for many households it matters more than the gas fill type. Low-E glass isn’t standard in every double glazed unit, so it’s worth asking about specifically.

The spacer bar and seal

The spacer bar sits between the two panes around the perimeter of the unit. It keeps the panes the correct distance apart, and it contains a desiccant — a moisture-absorbing material — that keeps the internal cavity dry.

Traditional aluminium spacer bars conduct heat easily, which creates a “cold edge” effect: even if the glass itself is well insulated, the edge of the pane loses heat rapidly. Warm edge spacer bars — made from composite or foam-based materials — address this problem. They reduce heat loss at the perimeter, which also lowers the risk of condensation forming at the edges of the glass.

The quality of the seal matters too. If the seal fails, air and moisture can enter the cavity, and you’ll eventually see fogging between the panes. That fogging can’t be cleaned — it’s trapped inside the sealed unit — and the only fix is replacing the unit.

Frame and installation: the parts most buyers overlook

Here’s something the product literature tends to gloss over: the glass unit itself is only part of the window. The frame conducts heat independently, and so does the gap between the frame and the wall if it isn’t properly sealed during installation.

uPVC frames are generally the best thermal performers and require minimal maintenance. Thermally broken aluminium frames — where a layer of insulating material separates the inner and outer sections of the frame — are the better choice when aluminium is preferred, because standard aluminium frames conduct heat readily. Timber frames insulate well and suit heritage properties, though they require more upkeep.

A high-performance glass unit in a poorly installed or thermally unbroken frame will still underperform. Installation quality has a real impact on outcomes, and it’s one of the most underappreciated variables when comparing quotes.

What Double Glazing Actually Improves at Home

Thermal comfort year-round

The most immediately noticeable benefit is comfort rather than the energy bill. Rooms feel more consistently warm in winter because the inner pane of glass stays closer to room temperature, rather than acting as a cold surface that radiates a chill across the room. In summer, with appropriate coatings and solar control glass, the windows also reduce heat gain.

Energy efficiency and bills

Double glazed windows reduce heat transfer between inside and outside, which means your heating and cooling system does less work. How much difference this makes depends on your climate, your home’s construction, how much of your wall area is glazing, and the specification of the windows themselves. In a poorly insulated home in a cold climate, the impact can be significant. In a well-insulated home with modest glazing in a mild climate, the improvement will be real but more modest.

A useful way to compare window performance is the U-value (sometimes called the U-factor), which measures how much heat passes through the window overall. Lower U-values mean better insulation. The R-value is the inverse — higher is better. When comparing products or quotes, ask for U-values and compare them directly rather than relying on vague claims about efficiency.

Condensation — the reality

Double glazed windows reduce condensation on the interior glass surface because the inner pane stays warmer. This is genuinely useful, particularly in bedrooms and kitchens where condensation on single-glazed windows causes mould and deterioration over time.

What they don’t do is eliminate condensation from your home. Moisture in the air still needs somewhere to go. If you upgrade to double glazing without improving ventilation, you might simply move where the condensation appears — on walls, in wardrobes, or behind furniture. The windows help, but ventilation remains important.

External condensation — dew forming on the outside of the glass — can actually increase with high-performance double glazed windows. This is a sign the windows are working well: the outer pane is staying cool because so little heat is escaping through it. It’s harmless and typically clears once the sun comes up.

Sound reduction

Double glazed windows reduce outside noise, but not as much as many people expect — and the improvement varies significantly depending on the type of noise you’re dealing with.

Standard double glazing with equal-thickness panes improves on single glazing, but panes of the same thickness tend to resonate at similar frequencies, which limits performance at certain sound frequencies. Using glass panes of different thicknesses, or opting for laminated acoustic glass, breaks that resonance and produces noticeably better results, particularly against traffic noise, bass sounds, and low-frequency hum.

If noise is a primary concern — a busy road, a flight path, a nightclub nearby — it’s worth specifying acoustic glass rather than assuming standard double glazing will do the job.

UV protection

Most double glazed glass, particularly when combined with Low-E coatings, blocks a substantial portion of ultraviolet radiation. This slows the fading of furniture, flooring, and fabrics. It’s not a dramatic effect that you’d notice week to week, but over years it’s meaningful.

What Actually Determines Performance

The variables that matter most, roughly in order:

Glass specification — Low-E coating, glass thickness, and whether panes are matched or asymmetric for acoustic performance.

Cavity width and fill — A 12–16mm argon-filled cavity is a solid baseline. Narrower cavities or air-filled units underperform.

Spacer bar type — Warm edge spacers reduce thermal bridging at the perimeter and lower condensation risk at the edges.

Frame material and thermal performance — uPVC or thermally broken aluminium outperform standard aluminium frames. The frame matters more than many people realise.

Installation quality — Air leakage around poorly fitted frames can negate much of the glazing’s performance. Draught-proofing during installation matters.

Solar heat gain coefficient (SHGC) or G-value — This measures how much solar radiation passes through the glass. In hot climates, a lower G-value means the glass blocks more solar heat. In cold climates, a slightly higher G-value on north-facing windows can contribute to passive solar gain. It’s a nuance worth understanding before specifying.

Double Glazing Versus the Alternatives

Single glazing is the baseline. It offers minimal insulation, poor noise control, and high condensation risk. There’s essentially no situation where choosing single glazing over double glazing makes sense in a new build or significant renovation.

Secondary glazing involves adding a second pane or panel to an existing window, rather than replacing it. It’s cheaper than full replacement and can be surprisingly effective, particularly for noise reduction. In heritage-listed properties where external appearance must be preserved, it’s often the only option. The drawback is that it doesn’t look as clean and may not perform as well thermally.

Triple glazing adds a third pane and second cavity. It performs better thermally, and in Scandinavian or alpine climates it makes clear sense. In most of Australia, the additional cost is harder to justify. The thermal improvement over high-quality double glazing is real but modest, and the extra weight and cost may not deliver proportional value in climates that are mild for much of the year. There are exceptions — parts of Victoria and Tasmania, and higher-altitude areas — where triple glazing deserves serious consideration.

Acoustic or solar control glass are specialist options that sit alongside rather than above standard double glazing. They address specific problems (noise or solar heat) and are worth including when those problems are significant, rather than as a default upgrade everywhere.

Is Double Glazing Worth It in Australia?

The short answer is yes, in most cases — but the payback picture varies.

In climates with cold winters and hot summers, such as Melbourne, Canberra, and much of inland regional Australia, double glazing delivers year-round benefit on both the heating and cooling side. In Sydney and Brisbane, where winters are milder, the case is still positive but leans more on comfort and summer cooling performance than on heating bills.

In very hot, low-humidity climates like Darwin or central Queensland, the priority shifts to solar control and glare reduction rather than insulation. In those areas, Low-E glass with a low solar heat gain coefficient and solar control glazing is likely to deliver more practical benefit than optimising the cavity gas fill.

The return on investment depends on how much glazing your home has, your current energy costs, and whether you’re comparing against single glazing or older double glazed units already fitted. It’s rarely a quick payback in pure energy-bill terms — five to fifteen years is a reasonable range depending on circumstances — but the comfort benefit is immediate, and the reduction in condensation and UV damage adds value that doesn’t show up in the energy calculation.

Choosing the Right Specification for Your Home

A few practical scenarios:

Cold south-facing rooms (Melbourne, Canberra, alpine areas): Prioritise a Low-E coating designed for heat retention, a 14–16mm argon-filled cavity, and warm edge spacers. Frame insulation matters here — thermally broken aluminium or uPVC.

West-facing living rooms that overheat in summer: Solar control glass with a low G-value is the priority. The cavity and gas fill still matter, but without solar control the room will continue to overheat regardless of how good the insulation is.

Homes on busy roads or near airports: Specify acoustic laminated glass. The pane thickness combination matters — ask your supplier specifically about acoustic performance ratings rather than just “double glazing.”

Older homes being partly retrofitted: If you’re replacing only some windows, prioritise the largest panes, the rooms with the worst condensation, and the windows facing the most challenging direction (west-facing in summer, south-facing in winter).

Coastal homes: Salt air accelerates the corrosion of aluminium frames and can degrade seals over time. Powder-coated aluminium with marine-grade treatment, or uPVC, is worth specifying. Check the warranty conditions specifically for coastal environments.

Bushfire-prone areas: In BAL (Bushfire Attack Level) rated zones, glazing choices may be constrained by regulation. Toughened or laminated glass is typically required, and the double glazed unit needs to meet the relevant standard. This is a compliance question as much as a performance one.

Common Myths Worth Clearing Up

“All double glazed windows are essentially the same.” They’re not. The difference between an entry-level unit with an air fill and standard glass and a high-specification Low-E, argon-filled unit with warm edge spacers can be substantial in real-world performance.

“Argon gas alone makes it a premium window.” Argon is a useful upgrade, but it’s one variable among many. A window with argon but no Low-E coating, standard spacers, and a thermally unbroken frame will still underperform a well-specified unit.

“Double glazing stops condensation.” It reduces it significantly on the interior glass, but it doesn’t address the underlying moisture in your home. Ventilation remains important.

“More panes is always better.” Triple glazing is worth considering in cold climates. In mild or hot climates, it often adds cost without delivering proportional benefit.

“A fogged unit can be cleaned.” Once the seal has failed and moisture has entered the cavity, the unit needs replacing. There’s no practical way to clean between the panes.

“The cheapest quote with double glazing will do.” Installation quality, frame specification, and glass type all vary considerably. Two quotes for “double glazing” can represent quite different products and outcomes.

Lifespan, Maintenance, and When to Replace

A well-made double glazed unit, properly installed, should last 20 to 25 years before the seal begins to degrade. Some last longer. The factors that shorten lifespan include poor original installation, exposure to harsh conditions, and low-quality seal material.

Signs the sealed unit is failing: fogging or condensation between the panes, visible discolouration inside the cavity, or a distortion in the glass that wasn’t there before. Once fogging appears, it typically progresses.

The good news is that in most cases you don’t need to replace the entire window. The sealed glass unit can often be replaced independently of the frame, which is considerably cheaper. This is worth confirming with your installer before committing to full replacement.

Maintenance is minimal: clean the glass normally, check the seals and drainage channels periodically, and keep timber frames painted or oiled as needed. The sealed unit itself requires nothing.

Frequently Asked Questions

What is an IGU? IGU stands for insulated glass unit. It’s the technical term for the sealed double (or triple) glazed panel — the two panes of glass with the sealed gas-filled cavity between them.

Is argon gas worth paying for? Yes, as a baseline upgrade over air-filled units. Argon conducts heat less readily than air, improving the unit’s overall insulating performance. It’s not a dramatic difference on its own, but it’s a sensible specification.

What does Low-E glass do? The Low-E (low-emissivity) coating is a microscopically thin metallic layer applied to the glass. It reflects radiant heat, keeping warmth inside in winter and reducing heat entry in summer depending on the coating type. In most Australian climates, specifying Low-E glass is well worth it.

Do double glazed windows eliminate noise? They reduce it, but not to the same degree for all sounds. Low-frequency noise from traffic or bass is harder to reduce than higher-frequency sounds. Acoustic laminated glass performs significantly better for noise reduction than standard double glazing.

How long do double glazed windows last? A well-made and properly installed unit typically lasts 20–25 years before seal failure becomes likely. The frames may last longer.

Can a fogged double glazed unit be repaired? No. Once the seal fails and moisture enters the cavity, the sealed unit needs replacement. The glass can’t be cleaned from inside. In most cases, you replace the glass unit rather than the entire window.

What is the difference between double and triple glazing? Triple glazing adds a third pane and a second sealed cavity. It insulates better, but the difference over high-quality double glazing is relatively modest. In most Australian climates, the additional cost is difficult to justify. In cold climates — parts of Victoria, Tasmania, or elevated areas — it’s worth considering.

What U-value should I aim for? Lower is better. A standard double glazed unit might have a U-value around 2.7–3.0 W/m²K. A high-performance Low-E, argon-filled unit can reach 1.2–1.8 W/m²K. The frame affects the overall window U-value, so compare whole-window figures when possible.

Are double glazed windows worth it in Australia? Yes, for most households — though the specification that delivers the best value varies by climate. In cold climates, insulation is the priority. In hot climates, solar control matters most. The comfort benefit is immediate regardless of how long the energy-bill payback takes.

What should I ask before buying? Ask for the U-value of the whole window (not just the glass), the gas fill type, whether Low-E coating is included and which surface it’s applied to, what spacer bar is used, the frame material and whether aluminium frames are thermally broken, and what the warranty covers for both the glass unit and the installation.

The Takeaway

Double glazed windows work by trapping a layer of insulating gas between two panes of sealed glass, slowing the movement of heat in both directions. The basic concept is simple, but the performance difference between a budget unit and a well-specified one is real and significant.

In Australia, where climate conditions vary considerably from Darwin to Hobart and from the coast to inland, choosing the right specification matters more than simply choosing double glazing over single glazing. The glass type, the gas fill, the coating, the spacer bar, the frame, and the installation quality all contribute to the final result.

If you’re investing in new windows, spend time on the specification — not just the price per square metre. The difference between a window that transforms your home’s comfort and one that’s merely an upgrade is often in details that are easy to overlook when comparing quotes.

Accreditations and Partners

Image Gallery

WHAT DOES EEWINDOWS OFFER?

EE Windows, we are committed to providing our customers with the highest quality windows and doors that offer both functionality and style. Whether you need double-glazing casement windows, UPVC casement windows or double-casement windows, we have the perfect solution for you.

Call us today for the best quotes and offers for your windows.
We will beat any

Quality
window solutions

Map

Trusted by over
150,000 Australians

Frame

Large selection
of materials, colours
and styles

Frame

Free consultation
and expert advice

1300 765 536 Get A Quote